Acknowledge Automatically - Ecolab EcoAdd Serie Instrucciones De Servicio

7.10.8.1 Acknowledge automatically:

The pump switches to Pause on empty signal and the empty signal symbol is displayed in
red . The suction pipe issues a "Full" signal to the pump after a container change and
the container change is detected and accepted without further confirmation.
Fig. 57: Acknowledge automatically
[Acknowledge automatically] - setting:
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Select empty signal] menu option.
4. [Select empty signal] - select.
5. If required, 'empty message contact' : 'closed contact = select empty signal'
ð After selecting this, a check mark
6. [ Press the Next button]
ð Screen changes to the acknowledgement query of the 'empty signal' .
7. [Acknowledge automatically] - select.
8.
Pressing the
ð The screen switches to the overview: [Configuration menu].
9. Pressing the
10. Pressing the
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
button saves the setting.
button returns to the [Main menu].
button returns to the [Operating display].
99
Control / software
is set in the selection field.
417102276 Rev. 3-01.2019