Acknowledge Manually - Ecolab EcoAdd Serie Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 750
Control / software

7.10.8.2 Acknowledge manually:

The pump switches to Pause on empty signal and the empty signal symbol is displayed in
red
. After pressing the red empty signal symbol, the container change must first be
approved on the screen and the suction pipe can then be moved to a new container.
Fig. 58: Select Acknowledge manually
[Acknowledge automatically] - setting:
1.
[Main menu] :
2.
[Configuration menu] :
3.
Use the scrollbar to scroll to the [Select empty signal] menu option.
4.
[Select empty signal] - select.
5.
If required, 'empty message contact' : 'closed contact = select empty signal'
ð After selecting this, a check mark
6.
[ Press the Next button]
ð Screen changes to the acknowledgement query of the 'empty signal' .
7.
[Select Acknowledge manually] - select.
8.
Pressing the
ð The screen switches to the overview: [Configuration menu].
9.
Pressing the
10. Pressing the
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
button saves the setting.
button returns to the [Main menu].
button returns to the [Operating display].
100
is set in the selection field.
Tabla de contenido
loading

Tabla de contenido