Control / software
7.9
Operating mode
Selecting the operating mode sets whether the pump is operated using internally set
values (Manual, Timer) or if an external signal determines the dosage rate (pulse,
current).
Fig. 31: Overview: Operating mode
Factory setting: Manual
[operating mode] selection:
1.
[Open main menu] :
2.
[Operating mode] selection.
ð Screen switches to the selection level [Operating mode].
3.
Setting the [operating mode] selection:
n
Manual
Ä Chapter 7.9.1 ' [Operating mode] [Manual]' on page 73
n
Pulse
Ä Chapter 7.9.3 'Operating mode [Pulse]' on page 75
n
Power
Ä Chapter 7.9.4 '[Operating mode] [Power]' on page 81
n
Timer
Ä Chapter 7.9.5 '[Operating mode] [Timer]' on page 84
– Weekly programme
Ä Chapter 7.9.5.1 '[Operating mode] - [Timer] [Seven-day programme]'
on page 84
– Interval programme
Ä Chapter 7.9.5.2 '[Operating mode] [Timer] [Select interval programme]'
on page 86
4.
Pressing the
ð The screen switches to the overview: [Main menu].
5.
Press the
ð The screen switches back to the [operating display] .
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
button saves the setting.
button.
72