Select Batch] - [Initial Preparation] - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software

7.10.12.2 [Select Batch] - [Initial preparation]

Fig. 68: Charge - [Initial preparation]
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Select Batch] menu option.
4. [Select Batch] - select.
ð Screen switches to the selection level [Select Batch]
5. 'Select initial preparation' .
ð The 'Initial preparation' option field is marked.
6. [ Press the Next button]
ð Screen change for setting: 'Initial preparation' / 'rate' .
7. Enter the quantity in litres (before the decimal point) using the scrollbar.
8. 'Select the quantity details in the decimal point position' .
9. Enter the quantity in litres (after the decimal point) using the scrollbar.
10. Press the Next
ð Screen change for setting: 'Initial preparation' / 'capacity' .
11. Enter the capacity in percent (%) using the scrollbar.
12. Press the
ð The setting is saved, and the screen switches back to the charge overview.
13. Press the
14. Pressing the
15. Pressing the
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
button.
button.
button to return to the [Configuration menu].
button returns to the [Main menu].
button returns to the [Operating display].
110