Berner 406766 Instrucciones De Manejo página 9

5. Connect the end of the corresponding adapter of
the vent hose (H) to the connector (G) located on
the top of the vent unit.
6. Insert the other end of the bleed hose (H) into the
liquid container of the main cylinder, turn on the air
valve (I) and press the push button (B) to start the
vacuum (allow a few seconds for the vacuum to
build up in the bleed container before it is sucked
in). While you are sucking out the old liquid, stir it
to loosen and remove the sludge that has
accumulated on the bottom and walls of the main
cylinder.
7. Once all the fluid has been removed, switch off the
unit and fill the master cylinder with the new brake
fluid recommended by the manufacturer.
H
H
B
EN
G
I