Idiomas disponibles
Idiomas disponibles
5. PROBLEM SOLVING
No
1
2
3
4
ENVIRONMENTAL INFORMATION
Never dispose of the appliance in normal
household waste. Dispose of the appliance via an authorised waste disposal company or via your
municipal waste disposal facility.
Observe the currently applicable regulations. If in doubt, contact your waste disposal facility. Dispose
of all packaging materials in an environmentally friendly manner.
Problem
If you turn the air valve to the „open"
position and press the push button
down, the extraction unit will not start
up.
If you turn the air valve to the „open"
position and press the push button,
but the extractor does not operate
When the liquid in the extractor tank
reaches the „full" position, the extrac-
tor does not switch off automatically.
If the suction unit is in operation but
can no longer suck in liquid
Solution
Please press the blue button located
on the „cover housing". If you hear
the sound „click", it means that the
normal condition is present. If no voice
is heard, it means that the unit is not
working properly.
You could stand on your head the
body tilts (if it is in the no liquid condi-
tion), if the body had the liquid, it could
shake 45 ° several times tilt and then
press the button, heard
„click" the sound means normal.
You should fill in some lubricant to
make the inside more slippery. The
correct place to fill the lubricant is as
follows: Make the quick coupling out
first, pump the oil in and then connect
the quick coupling, when the com-
pressor air comes in, the lubricant will
follow the air inside the extractor.
Please close the air valve and stop
the action, then dispose of the liquid in
accordance with the law, use the Trou-
bleshooting in step 1 and step 2.
Check if the hose is firmly inserted or
if it has slipped to check if the liquid is
empty or not to check if the liquid in
theTank of the
suction unit has reached the „full"
position or not.
EN
