Idiomas disponibles
Idiomas disponibles
3
General Description
Product Description
Reocor D is a battery-powered, external dual-chamber pace-
maker, which can be used in conjunction with temporary
pacemaker leads (including endocardial leads and trans-
venous implantable catheters) for temporary atrial, ventricu-
lar and AV sequential pacing in clinical settings.
The connection is made directly or via a separate patient
cable and adapter, if necessary.
There are six pacing modes available: DDD, D00, VDD, VVI,
V00 and VVT, as well as an atrial burst function.
The pacing mode, rate, sensitivity and pulse amplitude,
AV delay and burst rate are adjustable.
LEDs display the sense (Sense), pace (Pace) and battery
status (Low battery). An acoustic signal sounds when a very
high frequency or very low sensitivity value is set and when
the lead impedance is not optimal.
A defect of the device (failed self-test after the device was
switched on) is indicated by continuously lit LEDs and an
intermittent acoustic signal. If the self-test does not find any
errors, the acoustic and visual signals will turn off after a few
seconds.
The safety features of Reocor D include:
•
Visual display of sensed and paced events
•
Microprocessor-controlled pacing parameters
•
Lead impedance monitoring
•
Visual warning when the battery is almost depleted
•
A movable, transparent cover of the controls to prevent
accidental changes of the programmed parameters
Temporary catheters, heart wires and leads with 2-mm plugs
can be connected directly to Reocor D. Additional patient
cables and adapters are available, too. This system offers a
secure connection of transvenous catheters and myocardial
leads, which are applied either as unipolar or bipolar.
Indications
Temporary pacing with Reocor D is suitable for the following
applications for patients of any age:
•
Treatment of arrhythmias and heart block
•
Symptomatic sinus bradycardia
