Idiomas disponibles
Idiomas disponibles
13
Figure 2: Correct positioning of the protective cover
Figure 3: Unlocking the protective cover
Caution!
Protective Cover
The protective cover is locked when the cover has been
pushed to the stop, passing two snap-in points and when the
lever is resting on the rail (see Figure 2).
Correct:
To release the protective cover (see Figure 3):
Push the release lever up with one hand.
At the same time, use your other hand to slide down the
protective cover.
To lock the protective cover:
Slide the protective cover upwards along the rail until it
locks into place (see Figure 2).
The protective cover can be removed completely for cleaning.
Push the cover all the way down to the stop and then remove
it.
During use of Reocor D, the protective cover must be locked
to prevent inadvertent resetting of the rotary switch and con-
trol dial, and thus of the programmed parameters.
False:
