BIOTRONIK Reocor D Manual Tecnico página 21

Ocultar thumbs Ver también para Reocor D:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 128
18
Note:
Connection:
BIOTRONIK cable
patient-side
Recommended connections
Direct connection (without BIOTRONIK cables)
2 mm
PK-67-S/L with PA-1-B
Screw terminals
PK-175 with TC Adapt
Screw terminals
PK-83 with TC Adapt (2x)
Possible connections
Alligator clips
PK-141
Alligator clips
PK-67-S/L with PA-4
Alligator clips
PK-67-S/L with PK-155 (2x)
Alligator clips
PK-82 (2x)
Connection:
BIOTRONIK cable
patient-side
Recommended connections
Screw terminals
PK-175
Screw terminals
PK-83 (2x)
Possible connections
Alligator clips
PK-141
Alligator clips
PK-67-S/L with PA-4
Alligator clips
PK-67-S/L with PK-155 (2x)
Alligator clips
PK-82 (2x)
Patient cable
The patient cable is connected via a Redel adapter to the
Reocor D.
Fit the Redel adapter to Reocor D.
Screw the adapter in tight.
Insert the Redel plug of the patient cable into the Redel
port of the adapter.
No dual-chamber pacing is possible with the patient cable
PK-83-B. Leads that are connected with the PK-83-B are
connected to the ventricular channel of Reocor D.
Connection Variants
Temporary catheters with 2-mm plugs or
heart wire with 2-mm adapter
You have the option to connect Reocor D directly to a tempo-
rary catheter with touch-proof 2-mm plug or to a heart wire
with 2-mm adapter, without any other cables or adapters. All
other options are listed in the following table.
Heart wire with break-off needle or with
flexible end (max. 2.3 mm in diameter)
Connection
Reocor D
device-side
connection
2-mm connector port
Redel plug
Redel adapter
Redel plug
Redel adapter
2-mm plug
2-mm connector port
Redel plug
Redel adapter
Redel plug
Redel adapter
Redel plug
Redel adapter
2-mm plug
2-mm connector port
Connection
Reocor D
device-side
connection
Redel plug
Redel adapter
2-mm plug
2-mm connector port
Redel plug
Redel adapter
Redel plug
Redel adapter
Redel plug
Redel adapter
2-mm plug
2-mm connector port
loading