Tabla de contenido
Drive range - Second Gear
In Drive 2, transaxle drives is via the input shaft and clutch E. the elements of the transaxle function as follows;
The clutch E is applied to drive the front ring gear.
•
The front ring gear drives the front planetary gear carrier.
•
The front planetary gear carrier drives the differential pinion gear clockwise.
•
The brake F is applied holding the front sun gear stationary.
•
Control
Clutch E engaged
Solenoid 2 switched OFF. So the line pressure which is supplied from the 12 port of the reduction valve flow to the upper inlet port(34,35,36
port)of the clutch valve E. Line pressure connect to the 72 port. As a result, clutch E engaged.
Clutch F engaged
Tabla de contenido
