Alarm Codes; Routine And Special Maintenance; What To Do In Case Of Prolonged Shutdown; Notes - BestFor BISTROT 433 Manual De Instruccion

The message "Operation execution error" appears in case of incorrect access to the USB memory
stick.
The message "Invalid programme file" appears in case of incorrect file dimensions or a corrupted
file.

Alarm codes:

The error messages provided by the electronic control in the event of operating anomalies are
listed below. When one of the following errors is displayed, with the exception of error 009 which
is self-resetting, you must contact your nearest customer service centre.
Er. 001 = the power board does not respond
Er. 002 = incorrect firmware
Er. 003 = probe alarm: a probe is disconnected or short-circuited
Er. 004 = heating element anomaly
Er. 005 = programme memory not working
Er. 006 = programme for delayed start removed after setting
Er. 007 = blackout error: the baking could not resume after a blackout
Er. 008 = no network synchronism: the frequency of the network is unstable, or the power board is
faulty.
Er. 009 = motor thermal protection: the contact of the motor thermal protection on the power board
has tripped. Once the anomaly is resolved, the oven returns operational.

ROUTINE AND SPECIAL MAINTENANCE

The unit must be checked regularly by a specialized technician.
The oven is equipped with a thermal switch with manual reset which intervenes in the event of
overheating. To reset the thermal switch (after it has tripped), unscrew the plug on the lower left
part of the oven back. Then press the button to perform the reset. If the switch trips continuously,
contact a specialized technician for a thorough check.

WHAT TO DO IN CASE OF PROLONGED SHUTDOWN

If the unit is not going to be used for an extended period of time (seasonal closing, vacation, etc.),
it is advisable to clean it following the instructions and warnings on page 3, and then disconnect
the electrical devices and close the cut-off cocks upstream.

NOTES:

legend "Save"), select the programme to be exported by using "+" and "-
" keys and, once positioned on the selected programme, press the
key for 3 seconds. The programme will then be exported. The display
will show the legend "******" during this operation. The end of this
operation will also be indicated by the acoustic indicator. Repeat the
same operation for all the programmes you would like to export. To exit
the "Export" menu, press the
Bistrot/Gourmet Series Ovens– Page 47
key.