The set parameters can be changed at any time during the baking cycle, except during the
preheating phase. Press the
confirm by pressing the
Programme mode (customizable programming):
•
The ovens of the BestFor Series allow you to store up to 60 baking programmes,
customized according to the user's needs. Up to 5 Steps are available, each of which
include: time, temperature and climate. At the start of the programmed baking cycle these
steps will be executed in sequence, thus dividing the programme into true complete
cooking phases.
To store a programme, proceed as follows:
• Press the
the operation by pressing the
press the
parameters that will make up the programme. Set each parameter, confirming the value
with the
• To move from one "Step" to another, press the
• Once the setting of the desired Steps (max 5) has been completed, the programme can
be stored by pressing the
• The next phase consists in naming the programme which has just been stored. The
legend "name" appears on the display; scroll through the letters using the "+" and "-"
keys, moving on to the next one with the
confirm the operation by pressing the
Executing a customized programme:
To execute a programme stored by the user, proceed as follows:
• Press the
the selection by pressing the
programme. During execution of the programme, the baking parameters will not be
modifiable. You can stop the baking cycle before it's programmed to end simply by
using the
key, change the desired value using the "+" and "-" keys and
key. The changes will take effect immediately.
key. Using the "+" and "-" keys, select the first empty programme. Confirm
key, and the "Step 1" icon comes on to indicate the first sequence of
key, (refer to the manual mode).
key for 3 seconds.
key and use the "+" and "-" keys to select the desired programme. Confirm
key.
key. Now you can start programming the Steps:
key.
key. Once the procedure is finished,
key for 3 seconds.
key. Then press the
Bistrot/Gourmet Series Ovens– Page 36
key to execute the baking