Cool" - "Pump" - "Wash" Programmes; Characteristics Of Programmes In Progress - Preheating And Baking Time Extension - BestFor BISTROT 433 Manual De Instruccion

"COOL" – "PUMP" – "WASH" Programmes:
The "Programmes" mode of the electronic control also contains some non-modifiable
programmes. These are stored in the firmware of the control itself and are independent from the
60 programmes available for user customizing.
• "COOL" Programme:
• "PUMP" Programme:
• "WASH" Programme:
To select one of these programmes, proceed as follows:
• Press the
• Use the "-" key to scroll through the menu until the programmes described above are
displayed. Select the desired programme and confirm by pressing the key
• Press the
(page 10).

Characteristics of programmes in progress - preheating and baking time extension:

When any baking programme is started (manual, user customized or preset) the preheating phase
will begin, indicated by the legend "PRE" on the "Temperature" display, 2. This phase heats the
oven to a temperature about 30° higher than the temperature value set in the first step of the
programme, in order to compensate for the temperature drop that occurs when the oven door is
opened. At the end of this phase, an acoustic signal is emitted and the lamps inside the chamber
flash. Now you can place the product to be baked inside the oven and, when the oven door is
closed, the programme will begin its baking cycle.
At the end of the baking cycle, the oven emits an acoustic signal, proposing the
extension" mode. The time symbol flashes displaying a countdown of two minutes, during which
time you can extend the baking time as necessary. Use the "+" key to increase the time by one
minute increments up to the desired value. Press the
extension is made within the two minutes displayed, the oven terminates the baking cycle.
allows you to cool the oven in a short time by operating
the fans with the oven door open.
manages the filling of the pumps and hoses of the oven
washing system (optional), at the first filling of the tanks or
when the tanks are changed.
composed of LAV1 – LAV2 – LAV3. These 3
subprogrammes (delicate, normal and intensive) are
provided for the washing group (optional) and can be
selected as needed.
key to enter the Programmes mode.
key to execute the programme, as described for the programmes mode
Bistrot/Gourmet Series Ovens– Page 43
key to restart the baking. If no
"Baking