Setting The Gas Supply Type - Stryker PNEUMO SURE Instrucciones De Uso

Configuration Menu (Overview)
EN
Setting the venting pressure limit of the
venting valve
Setting the venting system response time
62
For example, press the Venting system OFF function field.
You now have the opportunity to
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
(2)
vious level,
2. press the  function field to return to the previous menu level without sav-
(1)
ing,
3. or press (EXIT) to return to the work screen without saving.
(3)
Factory setting = 3 mm Hg (for all operating modes)
For example, press the Venting pressure limit function field.
The display switches to the Pressure limit selection menu.
You now have the opportunity to
(2)
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
(1)
vious level,
2. press the  function field to return to the previous menu level without sav-
(3)
ing,
3. or press (EXIT) to return to the work screen without saving.
Factory setting = 3 s (for all operating modes)
For example, press the Venting response time function field.
The display switches to the Venting response time selection menu.
(2)
For example, press the 4 s function field.
You now have the opportunity to
(1)
1. save the selected value by pressing the (SAVE) function field. The display de-
(3)
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level,
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.

10.1.3 Setting the Gas Supply Type

Use this menu to select the type of connected gas supply.
Select House Gas if you are working with a house gas supply (use the correspond-
ing house gas device adapter available as an additional accessory). The gas supply