Idiomas disponibles
Idiomas disponibles
Check the power cord regularly for damage. Do not use the
device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-
HOT SURFACE! Risk of burns!
To avoid the hazard results please follow the safety instructions
below.
The surface of the device becomes very hot during operation!
To avoid burns of fingers and hands do not touch the hot
surfaces of the device! Touch only the designated handles and
control elements during operation.
- 27 -
