Idiomas disponibles
Idiomas disponibles
Product information
Thermo Scientific™ Sensititre AIM™ is a microprocessor-controlled automated inoculation delivery
system that rapidly delivers inoculum in multiples of 50µl to a 96-well microtitration plate.
Avoid contamination by using Sensititre™ Dosing Heads. This ensures that inoculum does not come into
contact with the instrument, either through aerosol formation or direct contact.
The performance of Sensititre AIM to inoculate standard 96-well microtitration plates (non-Sensititre
plates) has not been established. Although other brands of 96-well microtitration plates may be used on
the AIM instrument, they must be pre-qualified before use.
Intended use
Sensititre AIM™ is a microprocessor-controlled instrument designed to deliver multiples of 50µl of
inoculum to a Sensititre 96-well microtitration plate. Other brands of 96 well microtitration plates (non-
Sensititre plates) may be used on the AIM™ instrument however they should be pre-qualified before use.
The device is for professional use only and is not intended for self-testing.
Materials Provided
1 x Sensititre AIM
•
•
Power supply cable
Materials Required but not Provided
•
Sensititre broth tubes (Various)
Sensititre Dosing Heads (E3010)
•
Sensititre plates (Various)
•
Installation
WARNING!
Unpacking
It is possible for a single person to unpack the AIM system. However, the unpacking process is performed
most easily by two people working together, to ensure the safe removal of the AIM system from its
packing box and separation from its packing foam.
1. Remove the AIM system from its box, maintaining the instrument in an upright position.
2. Remove the AIM system from its plastic bag, maintaining the instrument in an upright position.
3. Place the AIM system on a flat solid surface.
4. Check for any damage that may have been caused to the instrument during transport (do not use
if there are any signs of damage and contact technical support).
5. Remove the protective plastic film from the touch screen display.
Sensititre AIM™ Instructions for Use
Do not connect the power cable until the following steps have been completed.
11
