VERTO 52G555 Manual De Instrucciones página 20

• Switch off the engine and remove the wire from the sparking
plug before commencing any maintenance or repair activities.
EXPLANATIONS OF USED SYMBOLS
1. Caution! Take precautions!
2. Fire hazards.
3. Hazard of poisoning with combustion gas.
4. Use protective gloves.
5. Switch off the engine and remove the wire from the sparking plug
before commencing any maintenance or repair activities.
6. Read the instruction manual, observe warnings and safety
conditions contained therein!
7. Use a safety helmet, protective goggles, earmuff protectors).
8. Use protective clothes.
9. Use protective shoes.
10. Do not put your hands or legs close to cutting parts.
11. Protect against humidity.
12. Do not allow other people in the working range of the strimmer,
maintain a minimum distance of 15 m from bystanders.
13. Watch for flying pieces.
14. Do not touch hot parts of the strimmer.
15. Danger of recoil.
16. Warning: Electric shock hazard!
CONSTRUCTION AND USE
The multi-function garden tools is driven with a single-cylinder, two-
stroke, air-cooled combustion engine. Used as a petrol strimmer,
the tools is ideal in difficult terrain conditions, especially where
petrol grass mower cannot be operated. Equipped with proper
cutting tools (triple-teeth blade, cutting string), it can be used
for evening out lawn edges and finishing works around the trees,
paths, for trimming tangled grass, reed and nettle in the garden.
When equipped with the chainsaw installed on the extension pole,
it can be used for cutting tree branches directly from the ground.
Only accessories intended for a given tool can be used and observe
guidelines given in the instruction manual. The multi-function
garden tool is intended for amateur applications.
The tool can be used according to its purpose only.
DESCRIPTION OF GRAPHIC PAGES
The following enumeration refers to the device elements depicted
on the drawing pages of this instruction manual.
1. Engine
2. Fuel filler plug
3. Fuel tank
4. Air filter housing
15m
15 16
5. Main handle
6. Throttle lever lock button
7. Throttle lever
8. Ignition switch
9. Arm strap clip
10. Arm strap
11. Guard
12. Spool with cutting string
13. Lock knob for driving shaft guard
14. Assist handle
15. Oil tank
16. Additional handle
17. Upper guard of driving shaft
18. Lower guard of driving shaft
19. Guide bar housing
20. Chain
21. Guide bar
22. Spindle lock hole
23. Internal washer
24. Spindle
25. Blade with three cutting edges
26. External washer
27. Metal guard
28. Spindle nut
29. Latch
30. Protective guard
31. Arm strap clip hook
32. Metal blade
33. Spool protection latch
34. Cutting string spool cover
35. Holes for cutting string
36. Spring
37. Sprocket wheel
38. Chain tension adjustment bolt
39. Oil filler plug
40. Oil feed adjustment screw
41. Throttle lever stroke adjustment bolt
42. Choke lever
43. Air filter guard
44. Starter rope handle
45. Sparking plug cable
46. Air filter guard knob
47. Idle speed adjustment bolt
48. Air filter
49. Membrane pump
50. Sparking plug
* Differences may appear between the actual product and the drawing.
DESCRIPTION OF USED GRAPHIC SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
20