Radio Mode; Storing Stations Or Calling Stored Stations; Scanning Stations - Blaupunkt Heavy Duty Serie Guía De Operación E Instalación Rápida

DAB | Radio mode

Radio mode

RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme in
the reception area "EUROPE" that allows the follow-
ing additional functions:
• The station name is shown on the display.
• The car sound system recognises tra ce an-
nouncements and news broadcasts and can
automatically switch them through in other
operating modes .
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is cur-
rently set.
• Regional: At certain times, some radio stations
divide their programme into regional pro-
grammes providing di ernet content. If the
REGIONAL function is activated, the car sound
system changes only to those alternate frequen-
cies on which the same regional programme is
being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chap-
ter "User settings", section "Making settings in
the "TUNER" menu", menu items "RDS AF" and
" REGIONAL").
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the di
erent reception areas:
Region
EUROPE
ASIA
USA
SOUTH AMERICA
THAILAND
SRC
Press the button
memory bank is displayed: FM1>FM2>FMT>
DAB1>DAB2.
Note:
• Up to 5 stations can be stored in each
memory bank.
7
DURBAN224 DAB BT
Memory banks
FM1, FM2, FMT, AM
FM1, FM2, FMT, AM
to select desired
Tuning into a station
There are various ways of tuning into a station:
Starting station seek tuning
Turn rotary control one notch counter-
clockwise or clockwise to start station seek
tuning.
The display brie y shows "SEARCH AUTO".
The radio tunes into the next receivable sta-
tion.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are turned into if the priority for tra c infor-
mation ( ) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENSITIVITY").
Tuning into stations manually
Press the rotary button once to activate
manual station tuning.
The display shows "SEARCH MANUAL".
Turn the rotary control to change the fre-
quency in increments.
Note:
The manual station tuning is automatically
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is
started by turning the rotary control .
Storing stations or calling stored
stations
Select the desired memory bank.
If necessary, set the desired station.
Press the station button 1 - 5 > for approx.
2 seconds to store the current station under
the button.
- or -
Briefy press the station button 1 - 5
up the stored station.

Scanning stations

With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
to call
>
7
22.05.19 17:00