Battery Operation; Using The Radio; Product Information - Blaupunkt BSA-8000 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
User manual
Connect the detachable AC cord (included) to the AC socket on the rear of the unit. Insert the AC power cord into a
convenient standard AC wall outlet.
Caution!
- The set must be disconnected from the mains to operate on batteries.
- When the set is connected to the mains, the power source automatically switches to AC.

Battery operation

1. Remove the lid of the battery compartment by sliding it outward in the direction of the arrow.
2. Insert 4 R20/UM1/"D"size batteries into the compartment. Make sure to match their polarities (+/-) to the markings
inside the compartment.
3. Put the lid back in place.
Note:
-The AC cord must be unplugged from both the socket on the unit and the power outlet for the unit to run on the
batteries.
- When the set is connected to the mains, the power source automatically switches to AC.
Notes on batteries (not supplied)
·Do not mix different types of batteries or old batteries with new ones.
·Never recharge the batteries, apply heat to them or take them apart.
·Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
·Do not throw the batteries in fire!
·Attention should be drawn to the environmental aspects of battery disposal.
·The batteries need to be replaced when: The volume decreases, or sound is distorted during operation.
·In order to avoid leakage, remove the batteries when unit will not be used for a long period of time.
·Please respect the environment. Before throwing any batteries away, consult your distributor who may be able to take
them back for specific recycling.
Caution!
Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.

USING THE RADIO

1. Press the ON/OFF button to turn on the radio.
2. Use the FM/MW/LW/SW selector to select band.
3. Use the tuning knob to tune to your desired radio station.
4. Adjust the volume level.
5. Adjust tone with TONE knob.
6. Press the ON/OFF button again to turn off the radio.
Note: Use the fine tuning knob for a precise frequency adjustment. This is useful when listening SW.
To enhance radio reception ability:
FM/SW: Extend the telescopic antenna.
MW/LW: Rotate the unit horizontally for optimum reception.
CONNECTING LINE IN SOURCE
·Connect your LINE IN source (e .g. mp3 player) to the LINE IN jack on the left side of the unit, the unit will change to LINE
IN function automatically.
·To stop playback, disconnect your LINE IN source from the LINE IN jack

PRODUCT INFORMATION

Power consumption:
Frequency Range:
5W
FM 87.5-108.0 MHz
MW 530-1600 KHz
LW 150-280 kHz
SW 5.80-10.0 MHz
BSA-8000 / BSA-8001
6
Tabla de contenido
loading

Este manual también es adecuado para:

Bsa-8001

Tabla de contenido