Tabla de contenido
User settings | Making setting in the "
Note:
During the phone call, you can change the
volume directly by means of the volume con-
trol.
BEEP (button beep)
Switching the con mation beep on or o
Settings: ON, OFF.
Note:
When storing radio stations, a con rma-
tion beep sounds even if the OFF setting is
selected.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
Making settings in the "CLOCK" menu
PERM CLOCK
Switching the permanent display on or o
Settings: ON, OFF.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 15 seconds
after the button is pressed last, the time is
displayed again.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
SET
Setting the time.
Press tuning button to change the setting.
Turn t tuning buttonclockwise to set the hours.
Turn tuning button counter-clockwise to set
the minutes.
Press tuning button to con rm the time setting.
Note:
When you set the time in 12-hour mode
(HOUR MODE 12), an "AM" is displayed before
the time for the time before noon or a "PM"
for the time after noon.
24
DURBAN224 DAB BT
VARIOUS
" menu
RDS CLOCK (automatic time setting) (only for
reception area EUROPE)
Switching automatic clock setting with clock data
transmitted via RDS on or o . Settings: ON, OFF.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
Note:
The time set with the clock data may not be
correct, even if an RDS station is being
received.
Making settings in the "VARIOUS" menu
DEMO MODE
Switching the DEMO mode on or o . Settings:
ON, OFF.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
In demo mode, the features of the radio are shown
as scrolling text on the display.
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 seconds.
Turn tuning button to change the settings.
Press tuning button to con rm the setting.
SWC(Steering Wheel Conguration)
Con guring the buttons of a connected steering
wheel control.
Press tuning button open the menu.
Turn tuning button to change between the
functions .
Press the rotary control to select a function.
Press the corresponding button on the steering
wheel control for approx. 1 second to program
the button with the selected function.
VERSION
Displaying the current software version of the
radio.
Press the rotary control to open the menu.
Turn the rotary control to display the version
number of the current software.
24
22.05.19 17:00
Tabla de contenido
