Connecting/Removing A Usb Data Carrier - Blaupunkt Heavy Duty Serie Guía De Operación E Instalación Rápida

Tabla de contenido
CD / USB / iPod mode
Changing to MP3/WMA/iPod mode
Press the SRC button repeatedly until the
desired audio source is displayed:
• "USB FRONT" or "USB REAR": USB data
carrier connected to the front or rear.
• "IPOD FRONT / IPHONE FRONT" or "IPOD
REAR / IPHONE REAR": Connected iPod /
iPhone at the front or rear side
• "MIC": Connected external Microphone.
Notes:
• If the car sound system t has to read the
data of a connected device or data carrier
before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design
of the device or data carrier. If the device
or data carrier is defective or the trans-
ferred data cannot be played back, a corre-
sponding message appears on the display.
iPod mode
You can connect numerous iPod and iPhone
models to the car sound system via the USB
port in the front of the device and the USB
port at the rear and control the audio play-
back from the car sound system.
Note:
• A list of compatible iPod and iPhone models
is located at the end of these instructions.
Blaupunkt can not guarantee the awless
function of other iPod and iPhone models.
• If an iPhone and iPod are connected at the
same time, the devices are charged via the
USB ports. If two iPhones are connected at
the same time, charging is not possible.
Use a suitable adapter cable to connect your
iPod or iPhone with the USB port of the car
sound system.
Inserting/ejecting a CD
Inserting a CD
Risk of severe damage to the
CD drive!
9
DURBAN224 DAB BT
Noncircular contoured CDs (shape CDs) and
CDs with a diameter of 8 cm (mini CDs) must
not be used. We accept no responsibility for
any damage to the CD drive that may occur as
a result of the use of unsuitable CDs.
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
Insert the CD with its printed side up into
the CD tray 5 until you feel a slight
resistance. The drive automatically draws in
the CD and checks its data. Afterwards, the
playback starts in CD or MP3 mode.
Note:
If the inserted CD cannot be played back, "CD
ERROR" is brie y displayed an the CD is
automatically ejected after approx. 2 seconds.
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
Press the
button 8 to eject inserted CD.
Note:
If a CD is ejected and not removed, the drive
will automatically draw it back in again after
approx. 10 seconds.
You can also eject CDs while the car sound
system is switched o or whilst another
audio source is activated.
Connecting/removing a USB data
carrier
Note:
• You can connect USB data carriers to the
USB port at the front of the device as
well as the rear USB port.
Connecting a USB data carrier
Switch o the car sound system so that the
data carrier will be correctly registerd.
First, pull the protective cap of the USB port :
to the front until it moves out of the port and
fold it to the right to connect a data carrier
to the USB port at the front of the device.
9
22.05.19 17:00
Tabla de contenido
loading

Este manual también es adecuado para:

2 001 018 000 002

Tabla de contenido