PASO 10
New Idler assembly
Take the new Idler-lever-a part.
Insert the two pins into the corresponding openings.
Mount the bearings onto the pins.
Cover the assembly with the Idler-lever-b part.
Insert the spacer tube into the corresponding opening.
Fix the assembly together using the M3x6 screw.
PASO 11
Swivel disassembly
We will need to take the Swivel assembly apart.
Using the T10 Torx key, remove the screws while you hold the nuts using the
needle-nose pliers.
Set aside for later use: M3nN nuts and spacer.
The printed parts and the screws won't be re-used. Set them aside so that they
don't mix up with the new parts.
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
95
