PASO 3
Herramientas necesarias para este capitulo
Para este capítulo, prepara por favor:
2.5mm Allen key
Llave Allen de 1.5mm
Torx key TX10/8
Needle-nose pliers
PASO 4
Nextruder disassembly (part 1)
Remove the top Loveboard-cover from the extruder by pulling it up.
Open the Idler swivel.
Fully loosen the M3x25 screws holding the gearbox cover.
Leave the screws in place. Do not remove them entirely yet.
There were multiple versions of the Nextruder. The earlier models have four
screws on the front. The newer model has three screws.
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
91
