PASO 13
Segment assembly (part 1)
Insert the bearing into the center opening in the wheel.
Make sure the bearing is inserted all the way in, until flush with the surface.
Repeat for the remaining four wheels.
PASO 14
Segment assembly (part 2)
Insert three M3n nuts into the marked openings on the Segment and push them all
the way in.
Add the wheel into the center of the segment.
Empuja el Ee hasta el centro del rodamiento, hasta que encaje en el segmento
inferior.
76
7. Montaje del Casete del buffer
Ensamblaje Original Prusa MMU3
