PASO 1
Introduction
In this guide, we're going to modify the Nextruder on your MK3.9 / MK4 to
accomodate the MMU functionality.
If you are using another printer type, please refer to the respective chapter for
the given printer.
The MK3.9 printer is functionally equivalent to the MK4. Therefore, it will be
referred to as MK4 throughout this guide.
Descarga el filamento de la impresora y retira el portabobinas.
Make sure the extruder on your printer is in the middle of both the X and Z axes.
Power off your printer and disconnect it from the power.
PASO 2
Spare parts bag
90
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
During the conversion of the
Nextruder to the multi-material
version, you'll handle many parts
that look similar but are different.
We recommend setting aside a bag
for spare parts to store components
that won't be needed anymore.
Rest assured, our guide will clearly
indicate which parts will be reused
and which won't.
Let's begin!
