PASO 7
PrusaSlicer setup for MMU3
Open the PrusaSlicer Assistant / Wizard. (Configuration > Configuration
Assistant > Prusa FFF)
Find the MK4 Family and make sure that Original Prusa MK4 MMU3 option is
selected.
The default nozzle is 0.4mm from factory.
Click Finish to close the Wizard.
In Printer: menu, select the MMU3 printer profile for future slicing.
Please be aware that the MMU3 on MK4 IS NOT COMPATIBLE with older
PrusaSlicer profiles or G-codes for MMU2, MMU2S, or even MMU3 + MK3S+ or
MK3.5.
Using an incompatible G-code file on the MMU3 + MK4 could lead to a failed print
or potentially damage the printer!
PASO 8
Descarga de archivos de firmware
10A. Configuración y Calibración MK4
Ensamblaje Original Prusa MMU3
You will need to update both the
firmwares for the printer as well as
the MMU unit. Use just the newest
firmware versions together.
Please refer to the
Firmware Compatibility
to find out exactly which
firmware version you need.
Vuelve a
Help.Prusa3D.com
Descarga el último pack de
Firmware para tu modelo de
impresora.
MMU3
article
145
