PASO 5
Nextruder disassembly (part 2)
Remove the whole gearbox assembly from the Nextruder.
Locate the metal washer that should be between the gearbox and the motor. It
might be stuck to the gearbox assembly.
Earlier versions of the Nextruder use an orange spacer instead of the metal
washer.
Reseat the washer / spacer on the motor shaft, in case it has come off the shaft.
The parts might be greasy. Clean off any excess grease.
PASO 6
Nextruder disassembly (part 3)
Con la llave Allen de 1.5mm, retira el tornillo prisionero.
If you own the 4-screw version of the Nextruder, this specific type of set screw
is not included.
Remove the Idler.
Remove the two M3x30 screws with the springs.
Remove the idler swivel assembly.
92
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
