PASO 1
Attaching the MMU unit (part 1)
The MMU3 unit should be placed onto the top part of the printer's frame.
Place the MMU3 unit onto the frame.
Attach it just by the top hooks.
Look from behind, there are "clamps", which will be used to lock the unit to the
frame in the next step.
PASO 2
Attaching the MMU unit (part 2)
142
10A. Configuración y Calibración MK4
Ensamblaje Original Prusa MMU3
Press the back part of the MMU3
unit downwards slightly, until the
clamps lock to the frame.
Check that both bottom clamps on
the unit are fully engaged.
If you need to remove the unit from
the frame, simply lift the back part
up to disengage the clamps.
