PASO 9
PrusaSlicer setup for MMU3
Open the PrusaSlicer Assistant / Wizard. (Configuration > Configuration Assistant
> Prusa FFF)
Scroll down to MK3.5 Family and make sure that the corresponding printer +
MMU3 option is selected.
The default nozzle is 0.4mm from factory.
Click Finish to close the Wizard.
In Printer: menu, select the MMU3 printer profile for future slicing.
Note, the MMU3 on MK3.5 is reverse-compatible with the older MK3S+ MMU3 or
MMU2S Slicer profile and G-codes - but not with the MMU2 profiles!
PASO 10
Firmware files download
186
10C. MK3.5 Setup and Calibration
Ensamblaje Original Prusa MMU3
You will need to update both the
firmwares for the printer as well as
the MMU unit. Use only a
combination of the newest
firmware versions for both devices
together.
Please refer to the
Firmware Compatibility
to find out exactly which
firmware version you need.
Vuelve a
Help.Prusa3D.com
Descarga el último pack de
Firmware para tu modelo de
impresora.
MMU3
article
