PASO 1
Herramientas necesarias para este capitulo
Por favor prepara las herramientas para este capítulo:
Needle-nose pliers
Llave Allen de 1.5mm para alinear las tuercas
Llave Allen de 2.5mm para tornillos M3
Una herramienta para medir (optional), lo mejor es un calibre digital.
PASO 2
Printer preparation
This chapter will describe a modification of the single-material MK3S+ /
MK3.5 extruder to accomodate MMU3.
Keep all the parts. Some of them will need to be re-installed back in place.
Antes de empezar, comprueba que:
The filament is unloaded and the print head is at a height it is easily accessible
at.
The printer is properly cooled down and the steel sheet has been removed.
La impresora está apagada y desenchufada.
On the MK3.5 printer, ensure you have easy access to the electronics box on
the left side.
106
9B. Mod extrusor MK3S+ / MK3.5 (KIT)
Ensamblaje Original Prusa MMU3
