PASO 16
Reensamblaje del ventilador del extrusor
Add the fan to the extruder and push it to the back. There are cables behind the fan.
You can GENTLY push the cables into the dedicated channel using an Allen key.
Before you proceed to attach the fan, make sure all the cables are inside the
channel.
Before you proceed to attach the fan, make sure all the cables are inside the
channel.
The fan has two sides, one has a sticker with markings on it. Make sure, this
side is facing to the inside of the extruder.
Fix the fan using the following screws (depending on the fan version):
M3x14 / M3x16b screw (3x)
M3x20 / M3x22b screw (1x) in the bottom corner.
PASO 17
New chimney: parts preparation
9C. Extrusor MK3S+ (UPG)
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
Base de la chimenea (1x) con el
inserto roscado Tappex Microbarb
0006-M5
Chimenea (1x)
Tuerca M3nS (1x)
Arandela M3 (1x)
Tornillo M3x30 (1x)
Tornillo M3x18 (1x)
135
