PASO 20
Main plate parts preparation
PASO 21
Main plate assembly
There is a V-shaped groove on the inside of the large round opening on the new
main-plate.
Insert the O-ring into the groove. Make sure it is seated properly.
100
9A. MK4 Nextruder mod
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
new Main Plate (1x)
We will need the newly
supplied main-plate.
It is different than the original
one in the gearbox assembly,
printed from PETG. Do not
reuse the old main plate, as it
may cause the printer to
malfunction!
The new main plate is 3D
printed using MJF technology. It
cannot be replicated with the
same quality using FDM
printing.
O-ring 24,5x1,5 (1x)
