PASO 9
Firmware Upgrade: Printer
IMPORTANT!!! Before you proceed further; There are two firmware files. One is for
the printer. The other one is for the MMU3 unit. Both needs to be flashed to the
respective device.
Firmware de la impresora - archivo .bbf
para la placa controladora de la MK4:
(por ej. MK4_MK3.9_firmware_6.0.0.bbf)
Update the printer's firmware.
Turn on the printer and connect the USB drive into it. Press the RESET button
to restart it. Then, select the FLASH option on the screen to begin the update.
Firmware de la placa controladora de la MMU3:
(por ej. MMU3_FW3.0.3+896.hex)
This firmware update must be applied directly to the MMU unit using a
computer. We will flash the MMU unit firmware in the upcoming steps.
146
10A. Configuración y Calibración MK4
First, transfer the firmware file onto a USB drive.
Ensamblaje Original Prusa MMU3
