Introduction; Device Description; Scope Of Delivery - Scheppach CSP2540 Traducción De La Instrucción De Original

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase re-
liability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regula-
tions for the operation of identical devices must be
complied with.
 www.scheppach.com /  [email protected] /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

2. Device description

1. Chain
2. Guide bar
3. Hand Guard / Chain Brake Lever
4. Fuel pump (Primer)
5. Throttle
6. Rear Handle
7. Safety locking button (throttle lock)
8. Starter grip
9. Air filter cover
10. Fan housing with starting assembly
11. Oil tank cap
12. Front grip (tubular handle)
13. Fuel tank cap
14. Choke switch
15. I/STOP-switch (short-circuit switch)
16. Retaining nut- Sprocket guard
17. Sprocket guard
18. Exhaust muffler
19. Carabiner or rope attachment point
20. Chain catch
21. Claw Stop
22. Allen wrench
23. Combination wrench
24. Chain protection cover

3. Scope of delivery

Chain (1x)
Chainsaw (1x)
Guide bar (1x)
Chain protection cover (1x)
universal wrench (1x)
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available). Check that
the delivery is complete. Check the device and ac-
cessory parts for transport damage. If possible, store
the packaging until the warranty period has expired.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
GB | 39