• If needed, the robot should be lifted in the chassis.
• During transport, secure the robot by the chassis�
Moving the robot
• The robot must only be moved when it's turned on�
• The robot must only be moved with both hands on the handlebars
when the clutch is used�
• Methods for moving the robot must be adapted to the ground and
personal capabilities.
• If the ground is steeply inclined (upwards or downwards) the motor
must be used, do not use the clutch or the transport wheel!
Recording (programming) and starting a robot program
• Before cleaning, the section must be cleared of humans (except for
the person carrying out the recording) and animals; aisles and pens
must be clear of obstacles, doors and gates must be closed�
• Warning signs must be placed by the entrance of the section during
cleaning�
• The person carrying out the recording must use ear defenders,
respiratory mask and safety goggles� Other recommended
equipment is protective clothing, boots and gloves.
• During recording the operator must keep a safe distance from the
moving parts of the robot and the high-pressure water jet�
• During recording the robot must be manipulated in such a way that
the water jet or the moving parts of the robot are not in contact
with sensitive electronics or other sensitive equipment.
• When using markers these must be firmly fixed and be able to
remain in the same position throughout the cleaning process.
• When using the double nozzle, the automatic wash must be
restarted if the water flow is interrupted. This to ensure that the
correct valve in the double nozzle is open�
Cleaning and maintenance
• Rinse the robot thoroughly after use. Do not use a high-pressure
water�
• The batteries must be recharged in a well-ventilated area free of
flammable materials.
• During maintenance the robot must be switched off.
7
EN