Tabla de contenido
Problem
The oven door cannot be opened.
Set clock" is shown in the status
bar. The time displayed is not the
right time.
Select language" is shown in the
right hand settings area.
The H symbol is displayed.
The microwave does not switch on.
The appliance does not heat up to
the temperature which has been
set.
The oven does not heat up.
Demo" is shown in the status bar.
Automatic switch off" appears in
the status bar.
Error messages beginning
with E
66
Possible cause
Power cut during
self cleaning.
Door not fully closed. Check whether food remains or foreign
The microwave was
not started.
The † button was
not pressed.
The oven is in
demo mode.
Automatic switch off
has been activated.
The oven switches off.
If an error message beginning with E" appears in
the display, press the 0 button. Then reset the time.
This clears the error message. If the error message
appears again, please call the after sales service.
With error messages E101, E104 and E106, you can
still operate the microwave.
If error message E011 is displayed, this means that a
button may have become stuck. Press each button
individually and check that they are all clean. If the
error message remains, please contact the after sales
service.
Remedial action/notes
Set the right time using the rotary
selector and press the 0 button.
The set language does not change after
a power cut.
Wait until the cooking compartment has
cooled down. The H symbol goes out.
You can open the oven door again.
material is trapped in the door. Make
sure that the sealing surfaces are clean.
Check whether the door seal is twisted.
Press the † button.
Press the † button.
Switch off the circuit breaker in the fuse
box, wait 20 seconds, and then switch it
back on again. Within the next two
minutes, press and hold the @ button
for four seconds until Demo" goes out
in the status bar.
Press any button. The text goes out.
You can make new settings.
Capítulos
Tabla de contenido
