Setting The Time - Siemens HB86P.72 Manual De Instrucciones

Setting tip:
Correcting the end time
Cancelling the end time

Setting the time

Following a power failure
Changing the time
Changing the clock display
50
This is only possible if the oven is on standby. To do
this, press the 0 button to open the menu, press
the ¿ or ¾ button to change the end time, and correct
the end time using the rotary selector. Press the 0
button to close the menu.
This is only possible if the oven is on standby. To do
this, press the 0 button to open the menu, press
the ¿ or ¾ button to go to the end time. Turn the
rotary selector anti clockwise until the display goes
out. The set cooking time immediately starts to count
down
The oven must be switched off before you can set or
change the clock.
"Set clock" appears in the status bar following a
power failure.
1. Set the current time using the rotary selector.
The display language set is displayed in the settings
area on the right hand side. This does not change
following a power failure.
2. Press the 0 button.
The time is applied.
Example: Changing from summer to winter time.
1. Press the 0 button.
The Time setting options menu opens.
2. Use the ¿ button to move to the clock 0 then
change the time using the rotary selector.
3. Press the 0 button.
The Time setting options menu closes.
The clock appears in the display when the oven is
switched off and shows the current time. You can
change the display to a different clock appearance, to
digital time or remove the clock from the display. Also
refer to the section Basic settings.