Waste Water Pipe - Pontos AquaCycle 2500 Instrucciones De Montaje

7.9. Waste water pipe

In the waste water pipe, the waste water flows
out of the pre-filter F1, out of the sediment ball
valves of the individual stages and the water
flows out of the tank overflows. During
installation, make sure that there is a 1%
gradient.
Filling the siphon with water as an odour
trap for the tank B3
1. Remove the plastic cover on the top right
corner of the tank B3.
2. Fill with water through the hole into the
overflow of the tank B3 until water flows
into the waste water line via the siphon.
3. Close the cover again.
Version 2.5
Operating Manual AquaCycle 2500
EN 55