Pressure Booster System; Carrier Material - Pontos AquaCycle 2500 Instrucciones De Montaje

5.3.8. Pressure booster system

The pressure booster system P3 is supplied with
water from the tank B3 at the 2" port.
The pressure booster system P3 and its
connection to the system are not included in the
scope of delivery.
On the controller's circuit board, connect the
potential-free enabling contact for the NO
contact of the pressure booster system P3.
Working on the circuit
board
The control box may only be
opened by a skilled
electrician.
Only a skilled electrician may
carry out work on the circuit
board.
Note!
During commissioning, it is
necessary to store in the controller
the configuration with the
additional shut-off device VA4.3
(see Operating Manual).
Note!
The process water outlet to the
pressure booster system P3 must
be realised with a flexible
connection.
The pressure booster system P3 supplies the
building (toilet flushing, garden watering) and
also the filter backflush line (including the
cleaning hose) with process water.
A pipe up to the connecting piece of the filter
backflush is not included in the scope of delivery.
EN 20
Assembly Manual AquaCycle 2500
Note!
It is not permitted to use drinking
water for the filter backflush and
the cleaning hose!
Note!
Colour-code the process water
lines (the entire length).
Identify the taps with the notice
"Not drinking water".

5.3.9. Carrier material

The foam cubes packed in bags are the carrier
material for the bio-degradation, and are
located in the tanks.
Note!
Remove the bags containing the
carrier material from the
containers, and keep them in a
safe place until the system's
leakage test and commissioning
have been completed (see
Operating Manual).
Version 1.3