Service: Reset (Pontos Service Only) - Pontos AquaCycle 2500 Instrucciones De Montaje

6.9.3. Service: Reset (Pontos
Service only)
Coming from the main page of the controller:
Acknowledge
Select
Acknowledge
The password is: *******
Increment
Select numbers
Acknowledge
Increment
Acknowledge
Manual operation is performed as described in
chapter 6.7.1 .
Version 2.5
Operating Manual AquaCycle 2500
Reset
When there is a reset, the hourmeters of the
entire system or of the individual components
are reset to zero.
After a component has been
replaced, the corresponding
hourmeter must be reset.
Hours total
Hours UV:
Hours P1:
Hours P2:
Hours V1:
Hours V2:
Move VA1.1
Move VA1.2
Move VA1.3
Hours VA3:
Hours VA4.1:
Hours VA4.2:
Water meter Z-TWN
Water meter Z-BW
System run time
UV lamp
Submersible pump,
Stage 1
Submersible pump,
Stage 2
Air pump, Stage 1
Air pump, Stage 2
Ball valve on filter
Ball valve, Stage 2
Ball valve, Stage 3
Solenoid valve, filter
backflush
Solenoid valve,
rainwater feed
Solenoid valve,
drinking water feed
Meter reading,
drinking water feed
Meter reading,
process water
EN 39