Bluetooth Bootloader - Importing New Software Version (Pontos Service Only) - Pontos AquaCycle 2500 Instrucciones De Montaje

6.9.4. Bluetooth Bootloader -
Importing new software version
(Pontos Service only)
1. Press all four pushbuttons and keep
them pressed until
a. the controller goes off,
b. "bootloader..." is displayed
and
c. the green LED lights up
continuously. (continuous
lighting up and display off
means: controller is ready for
update)
2. Make connection via Bluetooth (search
for device: "AC2500...")
3. Enter password: *******
4. Start Updater-exe (vers XXXXX).
5. Select COM interface to which
Bluetooth is connected.
6. Start Update.
The green and red LEDs light
Green
up during the Bootloader
Red
process.
Note!
Importing a new software
version does not delete the
set parameters. They are just
set to the status of the new
version as a result of the
values being reset (see
chapter 6.9.2)
EN 40
Operating Manual AquaCycle 2500
Version 2.5