Setting Parameters - Pontos AquaCycle 2500 Instrucciones De Montaje

6.4.1. Setting parameters

Setting
Select settings (see chapter 6.4)
Selection
Acknowledge
Selection
Acknowledge
Selection in the lower levels, as in the following
example:
Selection
Acknowledge
Unless otherwise stated, all times are given in:
Hours:Minutes:Seconds (hh:mm:ss)
Version 2.5
Operating Manual AquaCycle 2500
P01 general
• P010 configuration
0 = not present; 1 = present
o VA4.1 = Rainwater feed
o VA4.3 = Additional valve for drinking
water feed
o P3 = Pressure pump
o Z-TWN = Meter, drinking water feed
o Z-BW = Meter, process water
o HA1 = Customer's pumping system
o daylight saving = automatic
summertime / winter time
changeover
• P011 sel. language
o German
o English
o French
o Spanish
o Italian
• P012 backlight
o Setting the lighting duration for the
display
• P013 disp.contrast
o Contrast adjustment of the display
P03 operation
• P030 durat. run-in
o Run-in duration (in days)
• P031 batch time
o Time of one treatment
• P032 sedim. period
o Resting time for the sediments to
settle
• P033 fallback time
o Time until switchover to "automatic"
(e.g. after manual operation)
• P034 start time
o Time of the first provision of process
water on the day (time hh:mm)
• P035 max. off-time
o Time after the system returns to the
"run-in period" after a power failure
EN 27