Protective Conductor And Equipotential Bonding - Pontos AquaCycle 2500 Instrucciones De Montaje

5.3.11. Protective conductor and
equipotential bonding
Connect the controller to a protective conductor
on the frame.
Connect the frames of the tanks B1 and B2 / of
the tanks B2 and B3 at the connecting points,
using a protective conductor in each case.
On the frame of the tank B3, there is a
connection facility at the bottom for equipotential
bonding. A connection must be made to the
building installation.
EN 22
Assembly Manual AquaCycle 2500
Connect the protective conductor /
equipotential bonding as described in the
diagram.
Screw
Spring ring
Washer
Cable lug M5 1.5mm²
Washer
Serrated washer
Version 1.3