q
1. Ajusting bolt
1. Boulon de réglage
1. Perno de ajuste
w
2. Locknut
2. Contre-écrou
2. Contratuerca
5. Screw in the adjusting bolt on the brake
caliper by hand until it feels tight, then
screw it out 1/4 turn. Tighten the adjusting
bolt locknut to the specified torque.
Tightening torque:
16 Nm (1.6 m0kg)
w
Operating with improperly adjusted brakes
could cause the brakes to malfunction
resulting in reduced braking performance.
This could increase the chance of a collision
or accident.
After adjusting the parking brake, block the
rear of the machine off the ground and spin
the rear wheels. Check to make sure there is
no brake drag. If brake drag is noticed, per-
form the adjustment again.
8-87
