1. Locknut
1. Contre-écrou
1. Contratuerca
a. Cable length
a. Longueur du câble
a. Longitud del cable
q w
2. Adjusting bolt
2. Boulon de réglage
2. Perno de ajuste
a
EBU00775
Parking brake adjustment
Parking brake adjustment may be required if the
parking brake does not hold properly.
1. Fully loosen the parking brake cable
adjusting bolt locknut and the adjusting bolt
on the left lever holder.
2. Loosen the adjusting bolt locknut and the
adjusting bolt on the rear brake caliper.
3. Turn the adjusting bolt on the lever holder
so that cable length "A" is 46~50 mm.
NOTE:
If the cable cannot be adjusted to specification,
consult a Yamaha dealer.
4. Tighten the adjusting bolt locknut on the
lever holder.
cC
When tightening the locknut, hold the adjust-
ing bolt with a wrench so that the adjusting
bolt does not turn together with the locknut.
8-85
