Chicco Seat Up 012 Instrucciones De Uso página 28

9. ADJUSTING THE INCLINATION
To adjust the inclination of the child car seat,
pull the lever located under the seat (H) to-
wards you. When the Gr. 0+ (0-13 kg) child
seat is fitted, it must be adjusted to the maxi-
mum recline position.
In Gr. 1 (9-18 kg) and Gr. 2 (15-25 kg) the car
seat can be adjusted to 3 different positions
(Fig. 40).
10. ADJUSTING THE HEIGHT OF THE
BELTS AND THE HEADREST
The height of the headrest and belts can be
simultaneously adjusted using the headrest
and belt adjustment button (A) (Fig. 41).
To increase the height of the headrest release
the safety belts by pressing button F and, at
the same time, hold the two child car seat
harnesses under the shoulder straps and pull
them towards you. Then lift button A.
To lower the headrest press button A.
To adjust them correctly, the headrest must
be fitted so the harnesses come out from the
backrest at the height of the child's shoulders
(Fig. 42).
11. ADJUSTING THE CHILD CAR SEAT
BUCKLE
The child car seat buckle can be adjusted to
two different positions: A and B.
• Position A: use for Gr. 0+ (from 0 up to 13
kg) and Gr. 1 (9-18 kg).
• Position B: use for Gr. 2 (15-25 kg).
The buckle is in position A when purchased.
When the car seat is used for Gr. 2 (15-25 kg) it
is necessary to switch to position B.
Remove the padded crotch strap (I). Turn the
metal connector and switch from position A
to position B (Fig. 43). After this check that the
belt has not rolled up. Pull the buckle several
times to check it is inserted correctly. After ad-
justing, replace the padded crotch strap.
12. REMOVING 5-POINT SEAT BELTS
Loosen the 5-point seat belts as much as pos-
sible using button F.
Adjust the headrest to its maximum height
using the headrest and belts adjustment but-
ton (A).
Turn the child car seat so you are looking at
All manuals and user guides at all-guides.com
the back of the seat.
Remove the two belts from the metal connec-
tor (Fig. 44).
Position the metal connector in its specific slot
(Fig. 45).
Open the cover, remove the shoulder straps,
separating them by pressing on the connect-
ing ring (Fig. 46).
Remove the belts and take off the shoulder
straps, conserving for future use.
WARNING! When refitting 5-point belts re-
member to pass the belts above the metal
pin (Fig. 47). Open the buckle and remove the
straps from the belt, conserving for future use.
(Fig. 48).
Roll up the belts, replacing them between the
backrest and the seat (Fig. 49). Remove the
padded crotch strap (I) and the polystyrene
insert on the seat. Turn the buckle 90° insert-
ing it in its slot (Fig. 50).
13. SEATING THE CHILD IN THE CHILD CAR
Before sitting your child in the child car seat,
press the belt adjustment button (F) and, at
the same time, hold the two child car seat
harnesses under the shoulder straps and pull
them towards you to slacken them.
Unfasten the buckle (J) of the child car seat
belts by pressing the red button and pull the
harnesses in an outward direction. Now you
can sit your child in the child car seat.
Position the crotch strap correctly (I), take the
belts, overlap the two buckle straps (Fig. 51-
52) and push them together firmly inside the
buckle slot until you hear a loud click (Fig. 53).
14. CLEANING AND MAINTENANCE
MAINTENANCE
Cleaning and maintenance operations must
only be carried out by an adult.
How to clean the fabric cover
The child car seat's fabric cover can be re-
moved and washed by hand or in a washing
machine at
30°C. Please refer to the care label for instruc-
tions on cleaning the seat fabric.
28
SEAT
30° C
Never
not sp
witho
only
prove
since
and, th
WARN
car sea
To rem
tions b
- Rem
top pa
- Rem
guide
- Rem
(Fig. 5
- Rem
(Fig. 5
How t
Clean
a dam
gents
child C
CHEC
PONE
It is rec
dition
sure th
• fabric
not c
Check
always
• belts
fraye
parts