Honda CRF450R Manual Del Propietario Y Guía De Competiciones página 137

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 707
Front Suspension Adjustments
21. Clean the threads of the fork protector socket
bolts (20) and axle holder thoroughly.
Apply locking agent to the bolt threads.
Install the fork protectors (21), fork protector
bolts.
Tighten the fork protector socket bolts to the
specified torque:
7 N·m (0.7 kgf·m, 5.2 Ibf·ft)
(20)
(20)
(20) fork protector socket bolts
(21) fork protectors
22. Align the brake caliper (22) and hose (23) with
the left fork leg, making sure that the brake
hose is not twisted. An improperly routed
brake hose may rupture and cause a loss of
braking efficiency.
23. Assemble the stay B (24), brake hose (23) and
stay A (25). Install and tighten them to the left
fork protector using the brake hose clamp bolts
(26).
128
Adjustments for Competition
24. Clean the threads of the brake caliper
mounting bolts (27) and brake caliper
thoroughly.
Apply locking agent to the bolt threads.
Install the brake caliper (22) on the slider and
tighten the brake caliper mounting bolts to the
specified torque:
30 N·m (3.1 kgf·m, 22 Ibf·ft)
(23)
(24)
(21)
(25)
(26)
(20)
(22) brake caliper
(23) brake hose
(24) stay B
(25) stay A
(26) brake hose clamp bolts
(27) brake caliper mounting bolts
25. Clean the surfaces where the axle and axle
clamps contact each other.
Apply grease to each dust seal lip of the front
wheel.
Install the disc cover/collar (28) and right side
collar (29) into the wheel hub.
(27)
(28) disc cover/collar
26. Install the front wheel between the fork legs
while inserting the disc between the pads,
being careful not to damage the pads.
27. Insert the front axle shaft through the forks and
wheel hub from the right side. Make sure that
(22)
the front axle shaft is seated firmly onto the left
fork leg clamp inner surface. Tighten the front
axle nut (30) to the specified torque:
88 N·m (9.0 kgf·m, 65 Ibf·ft)
Tighten the left axle pinch bolts (31) to the
specified torque:
20 N·m (2.0 kgf·m, 15 Ibf·ft)
(30) front axle nut
(31) left axle pinch bolts
(28)
(29)
(29) right side collar
(31)
(30)
Tabla de contenido

Solución de problemas

loading

Tabla de contenido