Tabla de contenido
CAUTION
Turn off the power of all the equipment
before making connections.
Read instructions of each component you
intend to use with this unit.
Be sure to insert each plug securely. To
prevent hum and noise, do not bundle the
connection cords with the power cord or
speaker cord.
Power cord
A
< Be sure to connect the power cord to an
AC outlet which supplies the correct
voltage.
< Hold the power plug when plugging or
unplugging the power cord.
< When the cord is plugged in, a small
amount of current continues to flow to the
unit, even when the power is turned off.
Unplug the power cord from the AC outlet
when the unit isn't in use for some time.
18
Connection (1)
VIDEO or S-VIDEO jacks
B
Connect the component with an RCA
cable.
VIDEO OUT (DV-H350) w VIDEO IN
By connecting S-VIDEO jacks, you can
enjoy a clearer picture. If the component
has a S-VIDEO jack, connect them with a
S-VIDEO cord.
S-VIDEO OUT (DV-H350) w S-VIDEO IN
Note:
The signal from VIDEO jacks and S-VIDEO
jacks cannot be mixed. When you use S-
VIDEO jacks, be sure to connect all the
components(DVD,receiver, monitor, etc.)
via S-VIDEO jacks.
< If you connect the TV through a video
cassette recorder and play a copy
protected DVD disc, the playback picture
might be distorted.
ENGLISH
AUDIO OUT jacks
C
Connect the component with RCA pin
cords.
AUDIO OUT (DV-H350) w LINE IN
Make sure to connect :
white plug w white jack(L:left)
red plug w red jack(R:right)
D
DIGITAL OUT jacks
Connect the component with a coaxial
cable or an optical cable.
DIGITAL OUT (DV-H350) w DIGITAL IN
< Connect either OPTICAL or COAXIAL.
< When using DIGITAL OUT OPTICAL
terminals, remove the caps from the
terminals. When you do not use them,
leave the caps in place.
Select the proper audio output mode in
accordance with your connection. (see
page 66)
Tabla de contenido
