Incoming Water Supply Line Connection; Air Supply Line Connection; Cavitron ™ Jet Combination System Ultrasonic Scaler And Air Polishing Prophylaxis System; System Controls - DENTSPLY Cavitron Instrucciones Para El Uso

5.8 Incoming Water Supply
Line Connection
• Connect the free end of the system's water supply line
to office water supply line or a Cavitron
Dispensing System.
• Inspect all connections to make certain there
are no leaks.
Section 6: Cavitron
Scaler and Air Polishing Prophylaxis System
Description

6.1 System Controls

Top Grooves
Provide a convenient, temporary placement
for the handpiece during treatment procedures.
Always place handpiece in holder when not
being used.
Powder Adjustment
Turn knob to select ultrasonic power
level for operation: clockwise increases
system power, counter clockwise
decreases system power. NOTE:
for air polishing, set the level
between medium (mid)
and maximum.
AC Power Indicator Light
Lighted when System
is switched ON.
Power Control
ON/OFF switch located at the left front
underside of the System.
•
ENGLISH 6

5.9 Air Supply Line Connection

®
DualSelect
™
JET Combination System Ultrasonic
™
• Connect the free end of the system's air supply line
to office air supply line or a Cavitron
dispensing System.
• Inspect all connections to make certain there
are no leaks.
Powder Fill Cap
Removable cap for filling and emptying the
powder chamber. An adjustable pointer
increases or decreases powder flow rates.
Boost Indicator Light
The two-position Foot Control provides the
capability to increase the front panel Power dial
setting. When lighted, indicates Foot Control is
fully depressed, and System is functioning in
"Boost" mode.
DualSelect
™ ™
Handpiece Holder
Securely holds the
System's Handpiece
when system is not
being used.
Handpiece
®
™
Holds all Cavitron 30K Ultrasonic
Inserts and transmits power and lavage
from the System to the insert. It also
®
holds the Cavitron JET airpolishing
insert which automatically selects air
polishing mode.