Care, Maintenance, Transport, Conversion; Care; Maintenance (Fuse Replacement) - ORMED.DJO ARTROMOT-E2 Manual De Operación

6. Care, Maintenance, Transport, Conversion

6.1 Care

m Warning!
Shock hazard – Unplug the device from
the power line before cleaning.
Shock hazard, equipment damage
– Liquids must not enter the device or
the programming unit.
• The ARTROMOT -E2/-E2 compact can
®
be disinfected by wiping down with a
disinfectant. Thus, it complies with the
special hygiene standards for medical
technical equipment.
• The enclosure and removable sup-
port assemblies can be cleaned with
commonly used disinfectants and mild
household detergents.
• Only use a damp cloth to wipe the CPM
device down.
m Caution!
Equipment damage –
− The plastic material used is not
resistant to mineral acids, formic acid,
phenols, cresols, oxidants and strong
organic or inorganic acids with a pH value below 4.
− Use only clear disinfectants to prevent
discoloration of the device.
− Do not expose the CPM device to
strong ultraviolet radiation (sunlight)
and fire.
6.2 Maintenance (fuse replace-
ment)
Check before each use
Visually inspect the device for signs of
mechanical damage before each use.
If you detect damage or malfunctions that
may impair the safety of the patient or
of the operator, have the device repaired
before using it.
Technical inspections
For safety, the devices require regular
maintenance. To maintain the functional
and operational safety, check all compo-
nents for damage and loose connections at
least once a year.
These checks should be performed by
persons with adequate training and experi-
ence. Damaged and worn parts must im-
mediately be replaced with original spare
parts by authorized staff.
The inspections can be carried out by
ORMED.DJO Technical Service within the
framework of a service agreement.
The device does not require additional
regular maintenance.
77